Home
About US
Contact Us
FAQ's
?Small size
?Simple operation
?Hard appearance
?Using method
?Super high current
Product parameters:
- output voltage: 4.2V
- battery capacity: 5AH
- output current: 500A
- design current: 1000A
- input parameters: 5V/2.1A
- support welding: 0.1-0.2 nickel sheet, iron sheet, stainless steel
- welding time: several milliseconds
- Charging voltage: 4.5~ 5.5V (current≥2.5A)
- Product size: 150*80*22MM
- Shell material: hard aluminum alloy
- Weight: a set of 467g
- Packing: neutral box
Accessories:
? Host
? welding pen (30CM) * 2
?TYPE-charge line C
Purpose: This product is suitable for daily or small spot welding/butt welding work at home. It is automatically triggered without a switch, and the operation is convenient and quick.
Precautions
1) It can be operated while charging and charging, and it will enter standby mode
when charging.
(2) It is recommended to charge once half a year when it is not used for a long time, and charge it to 75%.
(3) Continuous use of the soldering pen will cause hot phenomenon, it is recommended Wear gloves to
operate
?Do not drop, water, heat, etc., which are harmful to the electronics.
?The black tip of the soldering pen will affect the effect.It can be worn off with sandpaper.
?If the spot welding is too long or the shutdown is due to good contact, just restart it.
Parts introduction
?Gear ?Remaining battery power ?Run/standby ??Connecting terminal of soldering pen
Instructions
| Boot up | Click the button ? |
| Shut down | 1. Double-click the button ?; 2. Automatically shut down after three minutes of standby |
| Gear adjustment | Button ? is for gear adjustment, click to change gears, the cycle is first gear>second gear>third gear>fourth gear>standby |
| Standby | 1. After the fourth gear, click again to enter the standby state ; 2. Enter the standby state without spot welding for more than 30 minutes . |
| spot welding | After turning on the machine, select the required gear and touch the welding object with the welding pen to spot welding. |
| Precautions for Spot Welding | 1. In the spot welding mode, please fix the spot welding objects; 2. Please keep the welding objects in a flat state; 3. Keep the cooling time about 10S after welding |